FBO-IV, 2428; 7-10/7-10, Nominal 100 MPH

Mold dimensions (nominal)

Operator selectable cope and drag heights

Standard settings

24" x 28" (610mm x 711mm)

7" to 10" (180mm to 250mm)

Low 7”, mid 8.5”, high 10”

Method of operation

Fully automatic or stops in mid-cycle for core insertion

Touch screen operator station

10” color

Programmable logic controller

A-B SLC5/04, password protected

Molding speed (nominal)

36 seconds per mold (at maximum height setting for cope & drag, low squeeze, depending on blow time, and excluding core insertion time.

Sprue cup & down sprue

One set is standard: 1 3/16”dia. (30mm)

Sprue positions

Six (6) are standard

Top of drag flask with machine on floor (core set ht.)

62.40” (1585mm)

Mold eject height with machine on floor

21.65” ( 550mm)

Pattern maximum weight

Pattern thickness

882 lbs. (400 Kg)

1.18" – 1.57" (30 – 40mm)?

Squeeze pressure:

Standard settings

145 PSI @ sand surface (max.)

Low 87 PSI, mid 116 PSI, high 145 PSI

Sand requirements

Moisture: 3-4% (+/- 0.25% of an avg. value)

Compactability: 36-45%

Total clay: 10-13% max.

Green strength: 11-21 PSI (for Iron only)

Temperature: 20 ° F above ambient (max.)

Sand quantity per mold / tons-per-hour

Maximum 710 lbs. / (36 TPH)

Air tank (minimum requirement)

106 cubic feet (3 m 3) 3” inlet, 6” outlet

Utilities (approximate):

Air pressure required

80 +/- 6 PSI

Air quantity per mold

88 CFFA/mold (2.5 m 3/mold)

Hydraulic Power Unit

(ISO VG46 wear-resistant oil by others )

Line Filters: (1) return & (1) cooler continuous flow

Noise level: Less than 75 dB

Water cooled heat exchanger (¾” in, ¾” out)

GPM required: 16 GPM @ 90 ° F

Required electrical service, minimum

100 amp feed

Hydraulic power unit

30 KW/ 40 HP

USA , Canada , Mexico & South America

Control voltage: 110 VAC, 1 ph., 60 Hz.

USA

Power voltage: 480 VAC, 3 ph., 60 Hz.

Canada (CSA)

Power voltage: 575 VAC, 3 ph., 60 Hz.

Mexico & South America

(voltage regulation transformer)

Power voltage: 480 VAC, 3 ph., 60 Hz.

Dimensions

166" w x 198" d x 176" h

(4216mm x 5029mm x 4470mm)

Machine Weight

56,000 lbs (25,402 kg)