|
MOLDING MACHINE SPECIFICATIONS:
|
FBO-II, 14x19; 5-8/5-8, Nominal 150 MPH
|
FBO-II, 16x20; 5-8/5-8, Nominal 150 MPH |
FBO-IIB, 16x20; 7-10/7-10, Nominal 120* MPH |
Mold dimensions (nominal)
Operator selectable cope and drag heights
Standard settings |
14" x 19" (356mm x 483mm)
5.1" to 7.9" (130mm to 200mm)
Low 5.1”, mid 6.6”, high 7.9” |
16" x 20" (406mm x 508mm)
5.1" to 7.9" (130mm to 200mm)
Low 5.1”, mid 6.6”, high 7.9” |
16" x 20" (508mm x 660mm)
7.1" to 9.8" (180mm to 250mm)
Can be preset at 3 stages |
Method of operation |
Fully automatic or stops in mid-cycle for core insertion |
Fully automatic or stops in mid-cycle for core insertion |
Fully automatic or stops in mid-cycle for core insertion |
Touch screen operator station |
10” A-B PanelView, color |
10” A-B PanelView, color |
10” A-B PanelView, color |
Programmable logic controller |
A-B SLC5/04, password protected |
A-B SLC5/04, password protected |
Allen-Bradley SLC 5/04, password protected |
Molding speed (nominal)
|
24 seconds per mold (at maximum height setting for cope & drag, low squeeze, depending on blow time, and excluding core insertion time. |
24 seconds per mold (at maximum height setting for cope & drag, low squeeze, depending on blow time, and excluding core insertion time. |
30* seconds per mold (at maximum height setting for cope & drag, low squeeze, depending on blow time, and excluding core insertion time) |
Sprue cup & down sprue |
One set is standard: 1”dia. (25mm) |
One set is standard: 1”dia. (25mm) |
One set is standard: 1”dia. (25mm) |
Sprue positions |
Ten (10) are standard; choose six (6) |
Ten (10) are standard; choose six (6) |
Ten (10) are standard |
Top of drag flask with machine on floor (core set ht.) |
44.88” (1140mm) |
44.88” (1140mm) |
|
Mold eject height with machine on floor |
14.76” ( 375mm) |
14.76” ( 375mm) |
16.73” ( 425mm) |
Pattern maximum weight
Pattern thickness |
100 lbs. (45 Kg)
0.59" – 0.98" (15 – 25mm) |
100 lbs. (45 Kg)
0.59" – 0.98" (15 – 25mm) |
130 lbs. (59 Kg)
0.59" – 0.98" (15 – 25mm) |
Squeeze pressure:
Standard settings |
142 PSI @ sand surface (max.)
Low 85 PSI, mid 114 PSI, high 142 PSI |
142 PSI @ sand surface (max.)
Low 85 PSI, mid 114 PSI, high 142 PSI |
142 PSI @ sand surface (max.)
Low 85 PSI, mid 114 PSI, high 142 PSI |
|
MOLDING MACHINE SPECIFICATIONS:
|
FBO-II, 1419; 5-8/5-8, Nominal 150 MPH
|
FBO-II, 1620; 5-8/5-8, Nominal 150 MPH |
FBO-IIB, 1620; 7-10/7-10, Nominal 120* MPH |
Sand requirements
|
Moisture: 3-4% (+/- 0.25% of an avg. value)
Compactability: 36-45%
Total clay: 10-13% max.
Green strength: 11-21 PSI (for Iron only)
Temperature: 20 ° F above ambient (max.) |
Moisture: 3-4% (+/- 0.25% of an avg. value)
Compactability: 36-45%
Total clay: 10-13% max.
Green strength: 11-21 PSI (for Iron only)
Temperature: 20 ° F above ambient (max.) |
Moisture: 3-4% (+/- 0.25% of an avg. value)
Compactability: 36-45%
Total clay: 10-13% max.
Green strength: 11-21 PSI (for Iron only)
Temperature: 20 ° F above ambient (max.) |
Sand quantity per mold / tons-per-hour |
Maximum 215 lbs. / (17-18 TPH) |
Maximum 271 lbs. / (21-22 TPH) |
Maximum 339 lbs. / (26-28 TPH) |
Air tank (minimum requirement) |
35 cubic feet (1.0 m 3) 3/4” inlet, 4” outlet |
35 cubic feet (1.0 m 3) 3/4” inlet, 4” outlet |
53 cubic feet (1.5 m 3) ¾” inlet, 5” outlet |
Utilities (approximate): |
|
|
|
Air pressure required |
80 +/- 6 PSI |
80 +/- 6 PSI |
76 +/- 4 PSI |
Air quantity per mold |
35 CFFA/mold (1.0 m 3/mold) |
35 CFFA/mold (1.0 m 3/mold) |
47 CFFA/mold (1.3 m 3/mold) |
Hydraulic Power Unit
(ISO VG46 wear-resistant oil by others ) |
Line Filters: (1) return & (1) cooler continuous flow
Noise level: Less than 75 dB |
Line Filters: (1) return & (1) cooler continuous flow
Noise level: Less than 75 dB |
Line Filters: (1) return & (1) cooler continuous flow
Noise level: Less than 75 dB |
Water cooled heat exchanger (¾” in, ¾” out) |
GPM required: 5 GPM @ 70 ° F |
GPM required: 5 GPM @ 70 ° F |
GPM required: 6 GPM @ 80 ° F |
Required electrical service, minimum |
60 amp feed |
60 amp feed |
60 amp feed |
|
MOLDING MACHINE SPECIFICATIONS:
|
FBO-II, 1419; 5-8/5-8, Nominal 150 MPH
|
FBO-II, 1620; 5-8/5-8, Nominal 150 MPH |
FBO-IIB, 1620; 7-10/7-10, Nominal 120* MPH |
Hydraulic power unit |
18 KW/ 25 HP/ 32 full-load amps |
18 KW/ 25 HP/ 32 full-load amps |
18 KW/ 25 HP/ 32 full-load amps |
USA , Canada , Mexico & South America |
Control voltage: 110 VAC, 1 ph., 60 Hz. |
Control voltage: 110 VAC, 1 ph., 60 Hz. |
Control voltage: 110 VAC, 1 ph., 60 Hz. |
USA |
Power voltage: 480 VAC, 3 ph., 60 Hz. |
Power voltage: 480 VAC, 3 ph., 60 Hz. |
Power voltage: 480 VAC, 3 ph., 60 Hz. |
Canada (CSA) |
Power voltage: 575 VAC, 3 ph., 60 Hz. |
Power voltage: 575 VAC, 3 ph., 60 Hz. |
Power voltage: 575 VAC, 3 ph., 60 Hz. |
Mexico & South America
(voltage regulation transformer) |
Power voltage: 480 VAC, 3 ph., 60 Hz. |
Power voltage: 480 VAC, 3 ph., 60 Hz. |
Power voltage: 480 VAC, 3 ph., 60 Hz. |
Dimensions |
114" w x 139" d x 110.5" h
(2890mm x 3515mm x 2807mm) |
114" w x 139" d x 110.5" h
(2890mm x 3515mm x 2807mm) |
114" w x 148" d x 131" h
(2890mm x 3755mm x 3328mm) |
Machine Weight |
29,000 lbs (13,180 kg) |
29,000 lbs (13,180 kg) |
|
