SCC Core Center

Roberts Sinto's SCC Core Center revolutionizes core production. The SCC Core Center uses the most advanced technology in core machine processing to produce intricate cores from a few ounces up to 130 lbs.

Controls

  • PLC Controls
  • Touch Screen
  • Diagnostics
  • Linear Transducers

The SCC Core Center controls allow the complete operation, set-up and machine monitoring from a single touch screen control mounted on the front of the enclosure. All major operations are hydraulic and are controlled by linear transducers providing fast, accurate operation.

Continuous Clamping of Core Box
The SCC Core Center continuously clamps the core boxes during the core making process. The blow head and gassing head are moved to the core box, keeping the mechanism simple and reducing the possibility of finning.

Special Air Flow Fluidizing Blow Chamber
The special blow chamber fluidizes the sand allowing the operator to make high-density intricate cores. The SCC Core Center will blow cores from a few ounces up to 130 lbs.

Horizontal / Vertical Core Boxes with Quick Change
The SCC Core Center can use both horizontal and vertical core boxes. A vacuum clamping system allows the SCC Core Center to use existing tooling and simplifies set-up.

Total Self-Contained System
The SCC Core Center is a complete system including mixer and gas generator, all contained in an environmentally friendly system.
CAPACITY SCC-30 CORE CENTER SPECIFICATIONS (CAPACITY 30 POUNDS CORE OR MOLD) SCC90-A CORE CENTER SPECIFICATIONS - (CAPACITY - 90 POUNDS - CORE OR MOLD) SCC-180 CORE CENTER SPECIFICATIONS (CAPACITY 180 POUNDS CORE OR MOLD OPTIONAL)
  VERTICAL HORIZONTAL VERTICAL HORIZONTAL VERTICAL HORIZONTAL
CORE BOX MOUNTING AREA (inches) 7.9: Hi x 15.7” Deep 17.7: Hi x 16.5” Deep 23.25” H x 27” D 24” H x 27” D 27.5" X 35.4"  
MAXIMUM WIDTH OF CORE BOX 9.8 ” 9.8” 18" (9”/9”) 27" 31.5" 37.4"
MAXIMUM DEPTH OF CORE BOX 16.5 ” 16.5” 27" 27" 39.4" 39.4"
MAXIMUM WEIGHT OF CORE BOX 220 LBS. – TOTAL 1650 LBS. - TOTAL 440 LBS. – (Vacuum) 1650 LBS. 880 LBS. 2205 LBS.
MAXIMUM CORE BOX HEIGHT 17.7” 17.7” 24" SEE DAYLIGHT 31.5" 31.5"
MAXIMUM OPENING OF PLATENS 23.4” N/A 45" N/A 47.25" N/A
MINIMUM OPENING OF PLATENS 3.7” N/A 8" N/A 11.8" N/A
STROKE OF L.H. PLATEN 9.8” N/A     17.7" N/A
STROKE OF R.H. PLATEN 9.8” N/A     17.7" N/A
MAXIMUM BLOW AREA     16” x 25” 22” x 25”    
DAYLIGHT     N/A 30.625” 32.7" 32.7"
STROKE OF VERTICAL CLAMP 11.8” 11.8”     19.7" 19.7"
EFFECTIVE EJECTOR STROKE     N/A 3.125”    
STROKE OF HORIZONTAL DRAW N/A 7.9”     N/A 13.8"
SAND MAGAZINE TRAVEL     19” 19”    
TRAVEL OF TABLE     39" 39"    
STANDRAD STROKE OF MANDREL RETRACT 23.6” 23.6”     59" 59"
SAND HOPPER CAPACITY 127 LBS. 127 LBS. 180 LBS. 180 LBS. 5.3 CU. FT. 5.3 CU. FT.
DRY CYCLE TIME, LESS THAN 13 SECONDS 13 SECONDS 25 SECONDS 25 SECONDS 26 SECONDS 26 SECONDS
ELECRICAL REQUIREMENTS: U.S.A. POWER 230/460 VAC, 3 Phase, 60 Hz 480 VOLT, 60 HZ, 3 PH
CANADA POWER 575 VAC, 3 Phase, 60 Hz
CONTROL: 110 VAC, 1 Phase, 60 Hz
AIR REQUIREMENTS 1.5 NPT LINE @ 75-100 PSI 1.5 NPT LINE @75-100 PS

1 1/2 N.P.T. LINE @ 560-800 KPA(80-100 PSI)
TYPICAL AIR CONSUMPTION

18 CFM PER CYCLE NOMINAL (@ 80 PSI)

18 CFM PER CYCLE NOMINAL (@ 80 PSI)) 1.2m3 PER CYCLE
APPROXIMATE WIEIGHT OF MACHINE 4,400 LBS. 6,800 LBS. 11,025 LBS.
ALL DIMENSIONS AND CAPACITIES ARE APPROXIMATE AND ARE SUBJECT TO CHANGE WITHOUT NOTICE

 

 


Watch a Video of the SCC90

Benefits Include:

  • Easy to Learn and Operate
  • Diagnostic Monitoring of Machine Operations
  • Reduces Finning and Assures Dimensional Accuracy
  • Quick Change Core Boxes
  • Uses Existing Core Boxes
  • Produces High Density Intricate Cores
  • Cores from a Few Ounces up to 130 lbs.
  • Includes Mixer and Gas Generator
  • Easy to Install and Maintain
  • Environmentally Friendly

 Roberts Sinto's SCC CoreCenter is currently operating at Frazier & Frazier. Capable of producing intricate cores (with reduced finning) from a few ounces to 130 lb, the unit (which includes a mixer and gas generator), offers touch screen controls, continuous corebox clamping, a special air-flow fluidizing blow chamber, horizontal/vertical quick change coreboxes all in a self-contained system.

3001 W. Main St., Lansing MI. 48917 • Phone: 517/371-2460 ext 0 • Fax: 517/371-4930 • E-mail:
An ISO 9001:2000 Certified Company
Below are links to our partner companies
©2009 Roberts Sinto Corporation